Floor lamp placement and maintenance

- Apr 20, 2017-

The floor lamp is usually placed in the lounge area of the living room, and the sofa and tea table cooperate, on the one hand to meet the regional lighting needs, on the one hand to form a specific environmental atmosphere. Usually, the floor lamp should not be placed beside tall furniture or obstructing activity. In addition, in the bedroom, the floor lamp can also be sent in handy. For example, reporters see a sample room, the bedroom is used in the photo-type floor lamp, forming a warm light environment.

Most of the floor lamp has a cover, tube-type hood is generally more popular, floor lamp bracket is more metal, Wood made. Also note that the stent and the base of the choice or production, must be with the shade, no "villain wearing big cap" or "thin tall wear caps" the imbalance.

Decorate the home lighting time, the floor lamp is the most easy to color the link. It can serve as a small area of the main lamp, but also through the illumination of different degrees and indoor other light to match the light environment changes. At the same time, the floor lamp can also rely on its own unique appearance, become home in the indoor a good furnishings. Therefore, to choose a beautiful, practical landing lamp, is decorated home lighting a basic task.

Floor lamp maintenance of the key step is moistureproof, whether the living room is placed, or bathroom, bathroom lighting and kitchen stove headlights, all to install a good moisture-proof shade, prevent moisture intrusion, led to corrosion damage or leakage short-circuit.

Clean maintenance to disconnect the power supply, at the same time should be careful not to change the structure of the lighting, also do not casually replace the parts of the lighting, in the clean maintenance, should be the same as the lamp, do not leak installed, wrong installation lighting components, lest cause danger.

Lighting of the wipe is divided into several situations: 1, ordinary cleaning with clean feather duster gently brushed dust can be very careful. 2, if a non-metallic floor lamp can be wiped clean with a damp cloth, pay attention to do not rub the power cord. 3, if the metal lighting with a dry cloth wipe can, do not touch the water.

In the use of lighting as far as possible do not frequent switches, because the lighting in the frequent start-up of the moment, through the filament current is greater than the normal work of the current, so that the filament temperature rise sharply accelerated sublimation, which will greatly reduce the service life, which is also all the lighting maintenance should pay attention to.